Kathrein UFD 510 - Manual (Page 31)

Initial settings
31
Optional other symbol rate
Enter an optional symbol rate using the numeric keys to .
Encrypted programmes
NO No encrypted programmes are recorded. the default setting
is “NO“.
YES Encrypted programmes are recorded.
Search run on satellite The keys can be used to select the satellite on which a search is to be
made for new transponders, e.g. ASTRA19.
If the “Start search run“ field is selected with the key, the key starts the
search run.
Transponder list The transponder list contains all of the transponders on which a search run can be
carried out for programmes. All of the transponders recorded in blue typeface are
defaults and cannot be changed. If a new transponder is set up with “New digital
transponder“, this is recorded in the list in black typeface. The data for this
transponder can be altered with the key.
The duration of the search run can vary from 5 minutes up to approximately 60
minutes.
The faster option for finding programmes on the ASTRA satellites is the ASIUS
search run.
New digital transponder
The input field for entering data for the new digital transponder is displayed on the
screen.
Name Think up a name for the new transponder.
•
Using the keys enter the name of the new transponder as follows:
•
Select the letter with the key. The choice starts with the letter “A“ at the
point marked dark blue. Following the last letter, “Z“, the numerals “0“ to “9“ are
displayed. If the desired letter is displayed, move to the next input position with
the key.
•
Select the desired letter there.
•
Enter the name of the new transponder in this way.
If you want to change a letter proceed as follows:
•
Using the keys move to the position that you want to change.
•
With the key, the selection begins with the letter “A“ again.
Satellite In this menu line you can select a satellite that your receiving system is aligned
towards.