Kathrein UFD 510 - Manual (Page 16)

Electronic programme guide and applications
16
After this
The information for the current programme shows the title and broadcasting
time of the subsequent programme. The lettering of the menu entry changes
into “now“. This allows you to switch back to the current programme.
These menu entries in the selection bar can be selected with the keys. A
selection must be confirmed with .
Example You want to select “Bayerische FS“ from the “ARD Digital“ bouquet. “Das Erste“ is
selected as the current programme. The order of the TV programmes is, of course,
only an example, and depends on your settings in the bouquet.
•
Keep pressing the key until “Bayerisches FS“ is selected. The title and
broadcasting time of the current programme is displayed.
•
Confirm your selection with .
•
Press the key once. In the selection bar “tv“ is selected or confirm your
selection with .
The current programme of Bayerisches Fernsehen is shown on the screen.
•
Press the key to return to programme selection again.
If you are located within a bouquet (APPL), a programme change can be carried
out using the keys.
Calling up the programme list
By pressing the red key on the remote control handset the programme selection is
superimposed on the screen transparently (not in the bouquet).
The current TV or radio programme is indicated on the screen in black typeface on
a light background.
•
Use the keys to scroll through the programme choice and select a
new programme with the keys.
•
Confirm your programme selection with the key.
The superimposed programme choice disappears again when the red key is
pressed once more.
A further pressing of the red key again causes the programme choice and current
programme to be superimposed.
With a radio programme tuned in, the programme choice can be seen only when
the TV set is turned on.