Kathrein UFD 510 - Manual (Page 33)

Initial settings
33
Settings
This menu entry contains the following submenu entries:
SATELLITE MENU This submenu entry contains a list of the predefined
satellites.
DiSEqC MENU With this submenu the settings can be carried out for
the DiSEqC signal.
TV TYPE This submenu contains settings for the type of TV
set used.
TIME This submenu contains the time information and the
time zone.
SOFTWARE UPDATE With this submenu a new software version can be
downloaded from the satellite.
SYSTEM DIAGNOSIS This submenu contains information on the receiver.
ANTENNA DIAGNOSIS With this submenu the alignment of the antenna can
be checked.
SATELLITE MENU
After selecting this submenu entry the list of predefined satellites is displayed on
the screen:
The list contains the following details:
Name of the satellite, e.g. ASTRA19
Frequency of local oscillator 1. LO1=9750 MHz
Frequency of local oscillator 2. LO2=10600 MHz
Order of connection when using
DiSEqC multiswitches
e.g. 1
LNB supply voltage in operation and in standby.