Kathrein UFD 510 - Manual (Page 37)

Initial settings
37
out. That is, if a signal level is shown and the Eb/No display indicates “not locked
on“, there is inadequate reception of the digital satellite signals.
Timer
With the “Timer“ menu entry, TV or radio programmes can be preprogrammed for
automatic switch-on of the receiver. The key takes you straight to this menu.
The screen shows the following input mask:
By pressing the key, programme “TV“ is selected and the current time is
entered.
Menu line for programming the timer:
The keys are used to switch between columns. A selected column is
highlighted in dark blue.
DATE The date is entered in this column using the numeric keys to . You switch
from position to position with the keys. The date is entered in the form
dd.mm.yyyy. After entering the date, the day of the week is displayed next to the
date.
START In this column, the programme starting time is entered using the numeric keys
to .
STOP In this column, the programme finishing time is entered using the numeric keys
to .
REPEAT In this column, the keys are used to specify the repetition of the
programme‘s start-stop time.
Day daily repetition
Week weekly repetition
Month monthly repetition
No no repetition