Kathrein UFD 510 - Manual (Page 32)

Initial settings
32
•
Select the desired satellite using the keys, e.g. “EUTELSAT13“.
Satellite frequency MHz The frequency of the new transponder is entered in this line.
•
Enter the frequency using the numeric keys to , e.g. 12379.
Polarisation The polarisation of the new transponder is selected in this line.
•
Select the desired polarisation with the keys, e.g. vertical.
Symbol rate The symbol rate of the new transponder is entered in this line.
•
Enter the symbol rate using the numeric keys to , e.g. 12379
Viterbi rate The Viterbi rate of the new transponder is entered in this line.
•
Select the desired Viterbi rate with the keys, e.g. 2/3.
•
Confirm your entries with the key.
•
Leave the menu with the key and save the changes with the key
New digital programme
This menu entry is intended for subsequent extensions.
Parental lock
This menu entry is described in the “Receiver operation“ chapter.