Make a voice call using asr – Kyocera DuraMax User Manual
Page 109
Calendar & Tools
100
Activate ASR
►
From standby mode, press and hold
,
, or the external speaker button.
Tip: You can also activate ASR and use certain features with the phone closed. Press and
hold the external speaker button while in standby mode to turn the keyguard off (if it is
enabled), and then press and hold the external speaker button and follow the voice
prompts.
The phone prompts you to say the name of the command you want to use. To complete your
task, simply follow the voice prompts.
Available ASR commands include:
● Call <Name or #> to call an entry in your Contacts list or a spoken phone number. See
● Send Message <Name or #> to send a message to an entry in your Contacts list or to a
● Lookup <Name> to display the detail screen of an entry in your Contacts list. See
Display a Contacts Entry‘s Information Using ASR
● Go To <Menu> to jump directly to menu items or applications. See
● Check <Item> to check your phone‘s status. See
details.
Tip: Use ASR in a quiet environment so it can accurately recognize your commands.
Tip:
During ASR operation, press TUTORIAL (left softkey) or HELP (left softkey) to get
instructions for using the software.
Make a Voice Call Using ASR
1. Press and hold
,
, or the external speaker button.
2.
When you hear ―Say a command,‖ say ―Call.‖
3.
When you hear ―Say the name or number,‖ say a name or a phone number.
4.
When you hear ―Which location?,‖ say a number type (for example, ―Mobile‖).
Tip: You can skip steps 3 and 4 by saying a name and location after
―Call‖ without pausing
(for example,
―Call John Jones mobile‖).
Note: If ASR does not recognize the name or number, it will find the most likely matches and
display a list of up to three names or numbers. You will hear
―Did you say, ‗Call...?‘‖
followed by the name or number. You can confirm by saying
―Yes.‖ Say ―No‖ to change
the selection.