Kyocera DuraMax - Manual (Page 32)

Phone Calls & Settings 23
2. Select Prepend > On.
3. Enter a five- or six-digit number and press .
To place a call using Abbreviated Dialing:
1. Enter the four or more digits of any part of a Contacts entry
‘s phone number to use the
Contacts Match feature.
– or –
Enter the last four or five digits of the number to use the Prepend feature.
Note: Contacts Match will not retrieve numbers if you enter 911 or reserved three-digit service
numbers such as 411 or 711.
2. Press to call the displayed number. (If there are two or more matched numbers in
your Contacts, a list is displayed. Highlight the name or the phone number you want to
call, and then press
to place a call.)
Call a Phone Number With Pauses
You can dial or save phone numbers with pauses for use with automated systems, such as
voicemail or credit card billing numbers.
There are two types of pauses available on your phone:
● Hard Pause sends the next set of numbers when you press SEND TONES (left softkey).
● 2-Sec. Pause automatically sends the next set of numbers after two seconds.
Note: You can have multiple pauses in a phone number and combine two-second and hard
pauses.
To dial or save phone numbers with pauses:
1. Enter all or part of a number.
2. Press OPTIONS (right softkey) > Hard Pause or 2-Sec. Pause.
3. Enter additional numbers.
4. Press to dial the number.
Note: When dialing a number with a hard pause, press SEND TONES (left softkey) to send the
next set of numbers.
Call a Phone Number in a Message
You can place a call to a number that appears in a message.
1. In standby mode, press MESSAGING (left softkey) > Messages.