Group connect, Make group connect calls – Kyocera DuraMax User Manual
Page 53
Sprint Direct Connect
44
Group Connect
A Group Connect call is a Direct Connect call made to up to 20 Direct Connect users with Sprint
phones nationwide at one time. You can make a Group Connect call in several different ways:
● By setting up a group entry in Contact on your phone.
● By using the Sprint Mobile Sync tool available at
● By selecting or entering multiple numbers for a one-time call.
For information on creating groups and storing them in Contacts, see
Important:
When making a Group Connect call or creating a group list for Group Connect
calls in Contacts, you must select an entry
‘s Direct Connect–capable number. If
you select a number that is not Direct Connect
–capable, the name will be
added to the list, but Group Connect calls will not go through to that group
member.
Group Connect Call Information
Make Group Connect Calls
You can make Group Connect calls by selecting saved groups from your Contacts, selecting
from group calls saved in History, or by creating groups for one-time use.
Make a Group Connect Call From Contacts
1. In standby mode, press CONTACTS (right softkey).
2. Highlight a group and press the DC button to begin the Group Connect call.
3. Continue the Group Connect call in the same manner as a one-to-one Direct Connect
call.
Note: Only one person at a time may speak on a Group Connect Call.
4. When you are finished, press
to end the call. (By default, when you end a Group
Connect call that you initiated, all other participants are dropped from the call. To change
this option, see
.)
Note: If you get an error message saying that your contact
―is not reachable via Direct
Connect
‖ or ―this number is not DC capable,‖ please check to see that you have entered
or highlighted a valid Direct Connect number.
Note: Currently Sprint phones do not support Group Connect calls with Nextel and
PowerSource phones. This enhancement is planned for future implementation. If your