Self-timer – Kyocera DuraMax User Manual

Page 118

Advertising
background image

Camera

109

Multiple Shots to take multiple shots. See

Multiple Shots

.

Fun Frames to select your favorite fun picture frame to decorate your picture

(displayed only when the resolution setting is 0.3M or 0.1M).

Color Tone to select a wide variety of color tones for the picture.

Image Controls to adjust settings for Brightness, White Balance, Sharpness, or

Contrast.

Camera Settings to adjust Resolution, Quality, and other settings. See

Camera

Settings

.

Review Media to go to the In Phone folder or memory card folder to review your saved

pictures.

Camcorder Mode to switch to video mode. See

Record Videos

.

Key Guidance to show keypad shortcuts in camera mode.

User Settings to provide convenient access to your favorite settings.

Self-timer

1. From camera mode, press OPTIONS (right softkey) > Self-Timer.

2. Highlight a delay time (5 Seconds or 10 Seconds) and press

.

3. Press

or START (left softkey) when you are ready to start the timer. (A countdown is

displayed in the middle of the screen and your phone will beep during the countdown.)

4. Get ready for the picture. (When the timer is down to three seconds, the tone of the beep

will change.)

To cancel the self-timer after it has started:

Press CANCEL (right softkey) or

.

Multiple Shots

This feature allows you to take three, six, or nine shots in a continuous sequence. When you
take multiple shots, the

icon will be displayed on the upper left corner of the screen.

1. From camera mode, press OPTIONS (right softkey) > Fun Tools > Multiple Shots.

Note: When taking multiple shots, the resolution is temporarily set to 0.1M (240x320).

2. Highlight an option and press

.

3. Highlight the duration of the interval between shots (Normal or Fast) and press

.

Advertising