Kenwood KRF-X9050D - Manual (Page 11)

11
Preparations
L R L
VIDEO 3 VIDEO 2 VIDEO 1
S VIDEO
R A L C L R
L R B
PLAY IN PLAY IN PLAY IN REC OUT PLAY IN
MONITOR OUT VIDEO 1 DVD
R
75 µ s AM 10kHz
FM 100kHz
50 µ s AM 9kHz
FM 50kHz
DE-
EMPHASIS
CHANNEL
SPACE
DVD
CD/DVD
OPTICAL
VIDEO 3
OPTICAL
MONITOR
OPTICAL
DIGITAL IN DIGITAL OUT
VIDEO 2
COAXIAL
COAXIAL DIGITAL
OUT (AUDIO) Connect the video signal and analog
audio signals to the
VIDEO 2 jacks.
(See “Connecting video compo-
nents”.)
0
Component with DTS, Dolby
Digital, or PCM OPTICAL
DIGITAL OUT
Connect the video signal and digital
audio signals to the
VIDEO 3 jacks.
(See “Connecting video
components”.)
0
DOLBY DIGITAL RF OUT (AUDIO)
COAXIAL DIGITAL OUT
(AUDIO)
OPTICAL DIGITAL OUT
(AUDIO)
LD player
RF digital
demodulator
(DEM-9991D)
(sold separately)
PCM OUT
CD player
Component with DTS, Dolby
Digital, or PCM COAXIAL
DIGITAL OUT
Optical fiber cable
OPTICAL DIGITAL
IN (AUDIO)
MD player
OPTICAL DIGITAL OUT
(AUDIO)
Digital connections
Setting up the system
The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS,
Dolby Digital, or standard PCM (CD) format digital signals.
If you have connected any digital components to the receiver, be sure to read the “Input mode settings” section
carefully.
8
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See “Connecting video components”.)