Kenwood KRF-X9050D - Manual (Page 18)

18
Preparations
Setting up the system
• To select the source connected to the AV AUX jacks, select AV
AUX by using the INPUT SELECTOR knob. £
• When you connect the audio source such as the MD player, you
do not need to connect the video cable.
• When you connect the unit and the component with the S
VIDEO cord, you can get better picture quality.
The AV AUX jacks are convenient for connection of video components
such as a camcorder or a video game.
Connecting to the AV AUX jacks
S VIDEO OUT
Camcorder, other VCR,
video game, digital camera,
or portable MD player
S VIDEO cord
VIDEO OUT
AUDIO OUT
Connecting the antennas
AM antenna terminal connections
1 Push lever. 2 Insert cord.
AM loop antenna
The supplied loop antenna is for use indoors. Place it as far as possible from
the receiver, TV set, speaker cords and power cord, and adjust the direction
for best reception.
3 Release lever.
AM loop antenna
FM indoor antenna
FM outdoor antenna
Use an antenna
adaptor
(Commercially
available)
FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the indoor
antenna when you connect one outdoors.
FM outdoor antenna
Lead the 75
Ω
coaxial cable connected to the FM outdoor antenna into the
room and connect it to the FM 75
Ω
terminal.
Attach to the stand
FM antenna terminal connections
Insert cord.
S VIDEO V L – AUDIO – R AV AUX
L R L
VIDEO 3 VIDEO 2 VIDEO 1
S VIDEO
R A L C L R
L R B
PLAY IN PLAY IN PLAY IN REC OUT PLAY IN
MONITOR OUT VIDEO 1 DVD
R
75 µ s AM 10kHz
FM 100kHz
50 µ s AM 9kHz
FM 50kHz
DE-
EMPHASIS
CHANNEL
SPACE
FM
75 Ω
GND
ANTENNA
AM