F.3 - operational commands, F.3 operational commands – KVH Industries TracVision L2 User Manual
Page 66
Azimuth CCW Step
Function:
commands a 0.1 deg CCW manual step in azimuth
angle
Command:
4
Argument:
none
Response:
echoes the command
Elevation UP Step
Function:
commands a 0.1 deg UP manual step in elevation
angle
Command:
8
Argument:
none
Response:
echoes the command
Elevation DOWN Step
Function:
commands a 0.1 deg DOWN manual step in elevation
angle
Command:
2
Argument:
none
Response:
echoes the command
F.3
Operational Commands
Idle Mode
Function:
halts active tracking and conical scan, then enters
idle mode
Command:
HALT
Argument:
none
Response:
echoes the command
Current Cable Wrap Angle
Function:
sets or reports current cable wrap angle, defined as
0
º
(CCW limit) to 700
º
(CW limit); the value is
expressed as 0000-7000 with an implied decimal
Command:
WRAPANGLE,xxxx
Argument:
the desired cable wrap angle setting
Response:
Wrap Angle = xxxf
F-3
Maintenance Port Parser Commands
54-0195 Rev. A
Table F-3
Operational Commands