Kenwood HM-233 - Manual (Page 11)

11
Preparation f
or Use
- System Connections -
Aerial connection
Notes:
Placing the aerial on the unit or near the AC power lead may cause noise pickup.
Place the aerial away from the unit for better reception.
When static is still heard even after adjusting the position of the AM loop aerial, try
reversing the wire connections.
Installing the AM loop aerial:
External FM or AM aerial:
Use an external FM or AM aerial if you require better reception. Consult your dealer.
Notes:
When an external FM aerial is used, disconnect the supplied FM aerial wire from
the FM 75 OHMS socket.
When using an external AM aerial, be sure to keep the wire of the AM loop aerial
connected.
Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) ter-
minal.
Caution:
Use speakers with an impedance of 8 ohms or more, as lower impedance speak-
ers can damage the unit.
Do not mistake the right and the left channels. The right speaker is the one on the
right side when you face the unit.
Do not let the bare speaker wires touch each other.
Connecting the AC power lead
After checking all the connections have been made correctly, connect the AC power
lead to the AC power input socket, then plug the AC power lead of this unit into the
wall socket.
Notes:
Unplug the unit if it will not be used for a prolonged period of time.
Never use a power lead other than the one supplied. Otherwise, a malfunction or
an accident may occur.
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS
socket and position the FM aerial wire in the di-
rection where the strongest signal can be re-
ceived.
Supplied AM loop aerial:
Connect the AM loop aerial wire to the AM and
GND terminals. Position the AM loop aerial for
optimum reception. Place the AM loop aerial on
a shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
External
FM aerial External AM aerial
15 m (49 feet)
7.5 m (25 feet)
AM loop aerial
Earth rod
Right speaker Left speaker
Incorrect
Black
Red