Kenwood HM-233 - Manual (Page 17)

17
CD Pla
ybac
k
- Listening to a CD -
To remove the CD:
Whilst in the stop mode, press the OPEN/CLOSE button.
Press the CD eject button and remove the CD.
Notes:
After removing the CD, make sure to press the OPEN/CLOSE button and close
the CD compartment.
When the unit enters the stand-by mode, the opened CD compartment cover will
be closed automatically.
After use:
Press the ON/STANDBY button to enter the power stand-by mode.
Caution:
Do not stop or move the CD compartment cover manually. It may cause mal-
functions to the unit.
Be careful not to jam your fingers in the CD compartment cover.
If the power fails whilst the compartment is open, wait until the power is restored.
If a disc is damaged, dirty, or loaded upside down, "NO DISC" or "READ ERR" will
appear on the display.
Keep foreign objects out of the CD compartment.
Subjecting the unit to shock or vibration may cause mistracking.
When the unit is not being used, be sure to close the CD compartment. If it is left
open, the lens may be covered with dust and the unit may not operate properly.
If TV or radio interference occurs during CD operation, move the unit away from
the TV or radio.
To locate the beginning of a track
To locate the desired portion
Notes:
Normal playback will resume when the or button is released.
When the end of the last track is reached during fast forward, "END" will appear on
the display and CD operation will be paused. When the beginning of the first track
is reached during fast reverse, playback will start when you release the
button.
The or button on the remote control allows you to locate the desired por-
tion.
CD Eject Button
To move to the beginning of the next track:
Press the button for less than 0.5 seconds during playback.
You can skip to any track by pressing the button re-
peatedly until the desired track number appears.
To restart the track being played:
Press the button for less than 0.5 seconds during playback.
You can skip to any track by pressing the button re-
peatedly until the desired track number appears.
For audible fast forward:
Press and hold down the button during playback.
For audible fast reverse:
Press and hold down the button during playback.