Kenwood HM-233 - Manual (Page 19)

19
CD Pla
ybac
k
- Pr
ogrammed Pla
y
-
Programmed Play
By specifying tracks from 1 to 99, you can choose up to 20 selections for playback in
the order you like.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be dis-
played. Then follow steps 1 - 3 to add tracks. The new tracks will be stored after the
last track of the original programme.
Notes:
Opening the CD compartment automatically cancels the programmed sequence.
Even if you press the ON/STANDBY button to enter the stand-by mode or the
function is changed from CD to some other function, the programmed selections
will not be cleared.
During programme operation, random play is not possible.
1
Whilst in the stop mode, press the MEMORY/SET (MEMORY) but-
ton to enter the programming save mode.
2
Within 30 seconds, press the or button to select the desired
track.
Selected track number Playback time
3
Press the MEMORY/SET (MEMORY) button to save the track
number.
Playback order Total playback time
4
Repeat steps 2 - 3 for other tracks. Up to 20 tracks can be pro-
grammed.
5
Press the / ( ) button to start playback.
To clear the programmed selections:
Press the CLEAR button on the remote control
whilst the "MEMORY" indicator is flashing.
Each time the button is pressed, one track will be
cleared, beginning with the last track pro-
grammed.
To cancel the programmed play mode:
Whilst in the stop mode and the "MEMORY" indi-
cator is lit, press the CLEAR button on the remote
control. The "MEMORY" indicator will disappear
and all the programmed contents will be cleared.