Krell Industries KCT - Manual (Page 20)

16 Krell Current Tunnel
37 Main Zone Key
Use this key to select the main zone (the main listening or viewing area). The red main
zone LED (11) on the front panel illuminates when the main zone is activated.
38 Z2 Key
Use this key to select zone 2. The green zone 2 LED (12) illuminates when zone 2 is
activated.
Note
Both zones can play simultaneously.
39 Input Select Keys
Use these keys to select the corresponding rear panel input that is connected to a
CAST (C-1, C-2), balanced (B-1, B-2), or single-ended (S-1, S-2, S-3) analog source.
The front panel display (13) shows the selected input, the active zone, and volume
level.
40 Tape Key
Use this key to select the corresponding rear panel input that is connected to a tape
analog source. When
TAPE is activated, the front panel display (13) shows the zone that
is the pathway for the tape output. See Tape Output Menu, on page 30.
Menu Functions
41 Menu Key
Use this key to access the menu options for customizing the KCT. The front panel
display (13) shows
MAIN MENU and submenu name. See Customizing the KCT
Preamplifier, on page 26.
42 Enter Key
Use this key to access submenu selections.
Level Control
43 Bal(ance) Key
Use this key, along with level keys (44) or level knob (14) on the front panel, to balance
output levels. The front panel display (13) shows balance status for three seconds.
44 Level Keys
Use these keys to increase or decrease system volume level or, with the balance key
(43), to adjust balance. The level keys are also used to select menu options to
customize the KCT. See Customizing the KCT Preamplifier, on page 26.