Krell Industries KCT - Manual (Page 36)

32 Krell Current Tunnel
SETUP MEMORY
This option allows you to save or recall new settings, or reset all settings to the factory
defaults. Remember, to exit the setup memory without altering the settings, select exit
and press the enter button (16) or key (42). You return to the main menu.
1. Press the menu button (15) or key (41) to access the main menu.
2. Use the level control knob (14) or level keys (44) to select SETUP MEMORY .
3. Press the enter button (16) or key (42). The front panel display (13) shows SAVE ALL
SETTINGS (the default).
4. Use the level control knob (14) or level keys (44) to select the preferred setup
memory ( SAVE ALL SETTINGS , RECALL ALL SETTINGS , FACTORY SETTINGS ).
5. Press the enter button (16) or key (42). The front panel display (13) shows PLEASE
WAIT . The KCT switches into the stand-by mode and reinitializes. The front panel
display shows KRELL KCT .
6. Press the power button (1) or key (32) to return the KCT to the operational mode. The
settings you selected are stored.
KRELL LINK
This option allows you to customize the operation of the KCT and Krell amplifiers
connected with Krell Link. See Krell Link Connections and Operation, on page 19.
1. Press the menu button (15) or key (41) to access the main menu.
2. Use the level control knob (14) or level keys (44) to select KRELL LINK .
3. Press the enter button (16) or key (42). The front panel display (13) shows DISABLED
(the default).
4. Use the level control knob (14) or level keys (44) to select the preferred Krell Link
option ( DISABLED , ENABLED , AUTO ON ).
Following are the definition of terms used with Krell Link.
Disabled. The amplifiers connected through Krell Link remain off when the KCT is
switched to the operational mode, for example, if you wish to record without listening to
music. The amplifiers can not be powered on when this option is engaged.
Enabled. The amplifiers connected through Krell Link remain off when the KCT is
switched to the operational mode. To turn the amplifiers on and off, use the amp pwr
key (33) on the KCT remote control.
Auto On. The amplifiers connected through Krell Link automatically power on when you
switch the KCT to the operational mode and power off when you turn the KCT off.
5. Press the enter button (16) or key (42) to return to the main menu or press the menu
button (15) or key (41) to exit the menu mode.