Krell Industries KCT - Manual (Page 26)

22 Krell Current Tunnel
MAIN ZONE AND ZONE 2 OPERATION
The KCT preamplifier’s two-zone operation offers a number of listening options.
Play Both Zones
This option allows you to play one input device through both zones or play a different
device through each zone simultaneously, and adjust volume levels for each zone.
1. Press the power button (1) or power key (32) to switch the KCT from the stand-by to
the operational mode. The front panel display (13) shows the main zone is active, the
currently selected input, and main zone volume level.
2. Press the input select button (6) or key (39) to select the device you wish to play in
the main zone.
3. Begin playing the device. Use the level control knob (14) or level keys (44) to adjust
main zone volume to the desired level.
4. Press the zone button (10) or Z2 key (38) to select zone 2. The front panel display
shows zone 2 is active, the currently selected input, and zone 2 volume level.
5. Press the input select button (6) or key (39) to choose another device to play in zone
2. You can choose the same input device to play in both zones, if you wish.
6. Begin playing the device. Use the level control knob (14) or level keys (44) to adjust
zone 2 volume to the desired level.
To turn off this option:
1. Press the Z2 key (38) to select zone 2.
2. Press the power button (1) or power key (32) once. This turns off zone 2 and
switches you to the main zone.
3. Press the power button or key again to turn off the main zone and return to the stand-
by mode.
Play Either Zone
This option allows you to play an input device in either the main zone or zone 2.
Main Zone Only
1. Press the power button (1) or power key (32) to switch the KCT from the stand-by to
the operational mode. The front panel display shows the main zone is active, the
currently selected input, and the main zone volume level.
2. Press the input select button (6) or key (39) to select the device you wish to play in
the main zone.
3. Begin playing the device. Use the level control knob (14) or level keys (44) to adjust
the main zone volume to the desired level.
4. Press the main zone key (37) again. The preamplifier returns to the stand-by mode.