Krell Industries KCT - Manual (Page 32)

28 Krell Current Tunnel
3. Press the enter button (16) or key (42). The front panel display (13) shows INPUT
BALANCE TRIM and S-1 (the default).
4. Use the level control knob (14) or level keys (44) to select the desired input
(S-1, B-1, tape, etc.).
5. Press the enter button (16) or key (42). The front panel display (13) shows the current
balance of the selected input.
6. Use the level control knob (14) or level keys (44) to scroll through the list of available
balance offsets from 0 to +6 dB, right and left, in .5 dB increments.
7. To set the balance trim for another input, press the enter button (16) or key (42) to
return to the input balance trim menu.
8. Repeat steps 4 through 6.
9. Press the enter button (16) or key (42) to return to the main menu, or press the menu
button (15) or key (41) to exit the menu mode.
THEATER (THROUGHPUT) MODE
This option allows you to simplify the integration of an audio/video surround sound
processor into your system by setting the CAST, balanced, or single-ended inputs to
operate as a unity gain stage. Krell calls this configuration Theater Throughput.
When you configure a KCT input for Theater Throughput, the KCT volume and balance
controls are transferred to the audio/video surround sound processor, for integrated
volume and balance management and ease of operation. As long as the KCT input is
configured for Theater Throughput and connected to the audio/video surround sound
processor’s main outputs, all system volume and balance adjustments are made
through the surround sound processor. When you disengage the KCT input from
Theater Throughput, the volume and balance controls revert to the KCT.
1. Press the menu button (15) or key (41) to access the main menu.
2. Use the level control knob (14) or level keys (44) to select THEATER MODE .
3. Press the enter button (16) or key (42). The front panel display (13) shows THEATER
MODE and S-1.
4. Use the level control knob (14) or level keys (44) to select the input to be placed in
Theater Throughput mode.
5. Press the enter button (16) or key (42). The front panel display (13) shows OFF (the
default).
6. Use the level control knob (14) or level keys (44) to select whether Theater
Throughput mode is off or on.
7. To select or disengage Theater Throughput for another input, press the enter button
(16) or key (42) to return to the theater mode menu.