KORG SP 250 - Manual (Page 14)

12 Chapter 2
CHAPTER
2
Before you begin
Connecting to an external amplification system
Use the OUTPUT connectors, if you like to connect your SP-250 to a high-quality
mixer, stereo hi-fi, or a couple of active monitors. When using a stereo hi-fi, connect
the OUTPUTs to the AUX or TAPE inputs (never use the PHONO inputs). For
mono amplification, connect only the L/MONO output.
Using the headphones
For playing or practicing during night hours, or when you don’t want to be heard by
others in the same room, connect one or two pairs of high-quality headphones (32
Ω
impedance suggested) to the appropriate PHONES connectors. These connectors
are standard 1/4” phone jacks. If your headphones have a mini-jack adapter, grasp
the adapter when plugging in or out the headphones.
Warning: When using headphones, protect your hearing by avoiding extended lis-
tening at high volumes.
to an AC outlet
DC IN
12 V
L/MONO
R
AUX IN
Powered
monitors, etc.
Headphones
Mini component/
stereo, etc.
AC adapter
(Power cable for AC adapter)