Knoll Systems Front Projector 1080p DLP - Manual (Page 11)

INTRODUCTION
10
WARNING! As the projector lamp becomes extremely hot, air blowing out from the ventilation
slots can be uncomfortably hot.
Using the Kensington Lock
This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver
Security System. Refer to the information that came with the system for instructions on how to use it to
secure the projector.
Projector (Rear View)
Exhaust vent Kensington Security
Standard connector
Exhaust vent
Remote control sensor
AC socket
Input: 100~240VAC
3.5A,50/60Hz.
Input 1: Component
Terminals for YPbPr/
YCbCr.
Input 4: PC
Terminal for connecting
PC RGB signals.
RS-232C terminal
Command control.
12V Trigger
Terminals for screen
controlling.
Input 3:
Video/S-Video
Terminals for connecting
Video/S-Video.
Input 2: HDMI
Terminals for connecting
HDMI.
USB
B type terminal for
service port.
IR Repeater
Terminal for wired
remote control.