Knoll Systems Front Projector 1080p DLP - Manual (Page 28)

27
Basic Operatio
n
3
Press on the projector to
select the INPUT mode.
Note
• When a signal is not received,
“Searching for Source” will be
displayed.
Note
• If you select “Auto” as the input
source, then the correct input source
is selected automatically.
4
Press on the remote control
or on the projector, then press
Enter to turn off the projector,
when the confirmation message
is displayed.
Note
• If you accidentally press power
and do not want to turn off the
projector, press Exit button or select
Cancel to turn off the confirmation
message.
Info
• Do not unplug the power cord during
projection or cooling fan operation.
This can cause damage due to the
rise in internal temperature, as the
cooling fan also stops.
INPUT
INPUT 1
INPUT 2
INPUT 3
INPUT 4
T, S, W, X
buttons
EXIT button
Power button
MENU button
INPUT button
INPUT
STATUS
EXIT
INPUT
MENU
ECO
ENTER
INPUT 2 button
INPUT 1 button
INPUT 4 button
INPUT 3 button
About the INPUT modes
INPUT 1
Selects the source Com-
ponent RCA / SCART.
INPUT 2
Selects the source HDMI
1 or 2.
INPUT 3
Selects the source Video
or S-Video.
INPUT 4 Selects the source PC.