Knoll Systems Front Projector 1080p DLP - Manual (Page 33)

32
Basic Operation
Use this option to adjust the tint of your image. Press X to make the image more green. Press W to make the
image more purple.
Use this option to adjust the clarity and focus of the image.
Use this option to adjust the gamma correction of the image. Default setting is 2.2. Gamma correction
provides eight sets of gamma corrections 1.0, 1.5, 1.8, 2.0, 2.2, 2.35, 2.5, and 2.8.
Use this option to set the color temperature of the image. There are five settings in the Color Temperature.
They are Warm, D65, Native, Cool, and Cold. The Cold color temperature makes the image look colder with
bluish hue, and the Warm color Temperature makes the image look warmer with reddish hue. When sets to
"Native", the image has the maximum brightness.
Use this option to determine how the color components of an input signal are decoded for accurate color on
the display. In most situations, the Auto setting produces the most accurate colors. If it does not, try the other
settings and select the one that does.
To remove any trace of color from the white areas of the projected image, choose White Balance from the
Picture menu and press ENTER.
Gain: Use the Gain controls to correct color imbalances in the bright areas of the image.
Offset: Use the Offset controls in the White Balance sub-menu to correct color imbalance in the dark areas
of the image.
Tint
Sharpness
Gamma
Color Temp
Color Space
White Balance