Knoll Systems Front Projector 1080p DLP - Manual (Page 19)

18
CONN
EC
TIONS AND SETU
P
Connecting the Thumbscrew Cables
„ Connect the thumbscrew cable making sure that it fits correctly
into the terminal. Then, firmly secure the connectors by tightening
the screws on both sides of the plug.
„ Do not remove the ferrite core attached to the HD 15-pin VGA
cable.
“Plug and Play” Function
„ This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC
compatible computer will communicate their setting requirements, allowing for quick and easy setup.
„ Before using the “Plug and Play” function, be sure to turn on the projector first and the connected
computer last.
Note
• The DDC “Plug and Play” function of this projector operates only when used in conjunction with a VESA
DDC compatible computer.
Ferrite core