Knoll Systems Front Projector 1080p DLP - Manual (Page 47)

Easy to Use F
unctions
46
This function allows you to determine the type of incoming video content-film. Different algorithms are applied
for each of the content types.
When this function is enabled, the OSD is
transparently displayed on the screen to blend
with the image.
Select “ON” from the “OSD Blending”
under the “Options” menu on the
menu screen.
 For operating the menu screen, see
page 30.
Select “Film Mode” from the
“Options” menu on the menu screen.
 For operating the menu screen, see
page 30.
Note
• In PAL50Hz or SECAM, the 2:2 pull down
enhancement will be enabled only in film
mode, after the film source has been
entered.
OSD Blending
Film Mode
Film Mode
Reproduces the image of
the film source clearly.
Displays the optimized
image of film transformed
with 3:2 pull down (NTSC
and PAL60Hz)or 2:2 pull
down (PAL 50Hz and
SECAM) enhancement to
progressive mode images.