Kenwood DNX7360BTM - Manual (Page 100)

100 DNX series DNX7360BT/ DNX7360BTM
3 End initial setup
⁄
• The settings above can be changed in <Setup
Menu> (page 67).
Initial Setup Initial Setup
1 Turns the power On
2 Set each item
[Language] Select the language used
for the control screen and setting items.
(page 69)
[Angle] You can adjust the position of
the monitor. (page 71)
[iPod AV Interface Use] Sets the
terminal which the iPod is connected
to. (
"iPod")
[Color] Sets the screen and button
illumination color. (page 75)
[EXT SW] Setting up external switch
power mode. (page 72)
[Camera] You can set Camera
parameters. See <Camera Setup> (page
81).
When pressing the Reset button or turning on the unit for the first time, the Initial SETUP
screen is displayed.
Initial Setup