Kenwood DNX7360BTM User Manual
Page 77
DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM English
77
Next page
3
Next page
3
[Search] Searches for a Bluetooth unit.
[SP DEV] Registers a Bluetooth unit that
cannot be registered by normal register
(pairing) operation.
⁄
• A new device cannot be registered if there
are 5 registered Bluetooth units. Delete
unnecessary registration. See <Bluetooth
Unit Connection> (page 79).
4
Display the PIN Code Set screen
1
1
1
1 Display the PIN Code.
[Search] Searches for a Bluetooth unit.
[Cancel] Cancels searching of Bluetooth
unit.
[PIN Code Set] Display the PIN Code
Set screen.
5
Enter PIN code
1
1
1
1 Enters a code number.
[Enter] Enter the PIN code specified for
the Bluetooth unit to register.
This button will not be active until at
least four PIN code digits have been
entered.
[Cancel] Cancels registration of PIN
code.
[Clear] Clears the code number.
6
Select the Bluetooth unit to register
1
1
1
1 Displays the searched Bluetooth unit.
Returns to the Connect Device List
screen.
⁄
• You can also register from the Bluetooth unit
side. For the PIN code necessary for registration,
see <Registering Bluetooth Unit PIN Code>
(page 78).
• If pairing cannot be done even when the
PIN code is correct, try <Registering Special
Bluetooth Unit>.
Registering Special Bluetooth Unit
Registers Special Bluetooth unit that
results in error by normal operation by
selecting from model name.
1
Display the Special Device List screen
2
Select a model name
Displays the Bluetooth unit name that
can be registered.