Kenwood DNX7360BTM User Manual
Page 71
DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM English
71
Next page
3
Next page
3
[Synchronize] Sets the clock time in
synchronization with the time data sent
from the navigation system or the RDS
station. (
DNX series: "Navigation",
DDX series: "RDS")
"OFF"/ "RDS"*
1
/ "Navigation"
When the synchronized mode is set, the
clock cannot be adjusted manually.
(*
1
Region 2/ 3 models only)
3
Adjust the date or clock time
Security Setup
Security Setup
A red indicator will blink on the unit after
the ACC is set to OFF, warning potential
thieves.
1
Display the Security screen
Touch [
]
>
>
[
]
>
>
[System]
>
>
[Security]. (page 67)
2
Setup the SI (Security Indicator)
[SI] Turns the SI function on or off.
If turned "ON", the security indicator on
the front panel flashes when the vehicle
ignition is off. (
"ON")
Monitor Angle Control
Monitor Angle Control
You can adjust the position of the monitor.
1
Display the Angle Setup screen
Touch [
]
>
>
[
]
>
>
[System]
>
>
[Angle]. (page 67)
2
Set the Monitor Angle
1
1
1
1 Sets the Monitor angle.
[Off Position] Stores the current
monitor angle as the angle during
power off.
[Auto Open] When turned on, the front
panel is set to open automatically when
the ignition is turned off, so that it can
be detached for antitheft purpose.
(
"OFF")