Kenwood DNX7360BTM - Manual (Page 43)

DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM English 43
Next page 3 Next page 3
Source Control Screen Source Control Screen
Switches to source control screen to use
various functions.
1 Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 18).
2 Operation on the Source Control
Screen
2 2 2 1 1 1
[BAND] Switches to TV1 or TV2.
[ 4], [¢] Select a channel.
Use the [SEEK] to change the channel
tuning sequence.
2 Display the TV Preset List Screen. See
<Preset Select> (page 45).
[ ] Switches to the TV screen.
1 Information display
Channel information display
"TV" Band display
"Group" TV Area Group Display. See
<TV Setup> (page 91).
"Preset" Memory Number Display
"ch" Channel display
[ ] When appears, the text display
is scrolled by touching it.
Multi Function
[1/2] Switches the multi function
display.
[ ] Closes the multi function bar.
[P1] – [P6] When [P1] to [P6] buttons
appear, you can recall channels on
memory.
For memory of broadcasting stations,
see <Auto Memory> (page 44) or
<Manual Memory> (page 44).
[SEEK] Switches the Seek mode.
The mode is switched in the following
order each time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception
automatically.
"AUTO2" Tunes in stations in memory one after
another.
"MANU" Switches to the next frequency manually.
[AME] Selects the Auto Memory mode.
See <Auto Memory> (page 44).