Kenwood DNX7360BTM - Manual (Page 64)

64 DNX series DNX7360BT/ DNX7360BTM
⁄
• There are following limitations when zone
function is set to "ON".
- There is no output from the subwoofer or
center speaker.
- "Subwoofer Level", "Bass Boost", and "Supreme"
of <Audio Control> (page 61) is not available.
- <Equalizer Control> (page 62), <Space Enhancer>
(page 64), <Listening Position> (page 64), <SRS
WOW Control> (page 65), and <Surround
Control> (page 66) are not available.
- <DSP Bypass Control> (page 82), <Speaker
Setup> (page 83), <Car Type (DTA) Setup>
(page 84), and <Channel Level> (page 86) are not
available.
Space Enhancer Space Enhancer
(DNX7/ DDX7 series)
(DNX7/ DDX7 series)
You can enhance the soundscape.
1 Display the Space Enhancer screen
Touch [ ] > > [ ] > > [Space
Enhancer]. (page 61)
2 Set the Space Enhancer
1 1 1
1 Sets the soundscape level.
⁄
• You cannot set Space Enhancer in tuner source.
Listening Position Listening Position
You can adjust the sound effects according
to your listening position.
1 Display the Position screen
Touch [ ] > > [ ] > > [Position].
(page 61)
2 Set the Position Control
[P1] - [P3] Stores the present
adjustment setup in memory, or recalls
it from memory.
To store your adjustment in memory:
Continue to touch [P1] to [P3] more
than 2 seconds.
To call your adjustment from memory:
Touch [P1] to [P3] of your adjustment
you wish to recall from memory.
[ 2], [3] Sets a listening position.
You can select any of "Front R" (Right
front), "Front L" (Left front), "Front All"
(All front), "All" (All), and "User" (User)
positions.
[DTA] Displays the Position DTA (Digital
Time Alignment) screen.
3 Exit Position Control
⁄
• The final distance is adjusted to the total of Car
Type Set Up value (page 84) and Position Setup
(both Position and Position DTA) value.
• If you change the Car Type Set Up value (page 84),
the position is set to "All".
Audio Control