Lathem TRUALIGN TIME RECORDER 800P - Manual (Page 11)

800P TruAlign Time Recorder User Guide
Page 12
Setting the Time
To enter the ‘Time Set Up Mode’, press the
+
and SET
buttons at the same time.
The blue light will turn off and the display will show the hours
and minutes, release the
+
and SET buttons.
Press the
+
button to move the time forward or press the -
button to move the time backwards. To move quickly through
the time, press and hold down the
+
or - button. Holding
down either button will increase how quickly you scroll through
the time. When you have the desired hours and minutes on the
display, press the SET button.
Note: The seconds will be zeroed when you press the SET
button, so it’s recommended to set the time 1 or 2 minutes
ahead of the actual time. Wait until the actual time matches
the time recorder, and then press the SET button which will
synchronize the time recorder time with the actual time.
Example: Set the time from 11:00am to 1:00pm
Step 1
Press the button to scroll forward until
the display shows ‘PM 0 1 0 0’. Notice while
you are scrolling through the hours the AM
will change to PM.
Step 2
Press the SET button when the AM/PM
indicator, hour and minutes are correct. The
time will be accepted and the time recorder
will return to a normal display.
AM
1 1 0 0
PM
0 1 0 0
Hours and Minutes