Lathem TRUALIGN TIME RECORDER 800P - Manual (Page 33)

800P TruAlign Time Recorder User Guide
Page 34
Appendix D - Changing the dates for
Daylight Savings
By default, daylight saving time is factory set for the second
Sunday in March and the first Sunday in November.
To change the factory set daylight savings dates, see the
instructions below.
Enter the ‘Setup Mode’. See Page 13.
Press the SET button until you get to Function 4.
Press the
+
or
-
button until the display shows ‘Y’. Then press
the SET button to go to Function 5.
Use the
+
or
-
button to scroll through and set the
desired month for the spring daylight savings. Then press
the SET button to go to Function 6.
Press the
+
or
-
button to scroll through and set the
desired Sunday for the spring daylight savings. Then press
the SET button to go to Function 7.
Setting Values
1 = First Sunday
2 = Second Sunday
3 = Third Sunday
4 = Fourth Sunday
L = Last Sunday
Use the
+
or
-
button to scroll through and set the
desired month for the fall daylight savings. Then press the
SET button to go to Function 8.
Press the
+
or
-
button to scroll through and set the
desired Sunday for the fall daylight savings, and then press
the SET button.
Setting Values
1 = First Sunday
2 = Second Sunday
3 = Third Sunday
4 = Fourth Sunday
L = Last Sunday
Press the SET button through Function. 9, 10, 11, 12, 13, 14
and 15.
The time recorder will go to the normal time/date display
with the changes for daylight savings applied.