Lenovo TS130 - Manual (Page 83)

Table 23. Submenus under the Fingerprint Setup menu
Item Option Description
Preboot Authentication [Enabled] / Disabled Enable or disable the fingerprint
reader function for BIOS password
input.
Erase Fingerprint Data Yes / [No] Select whether to clear fingerprint
data stored in a fingerprint reader.
Note: [ ] indicates the default setting.
Table 24. Submenus under the System Event Log menu
Item Description
View System Event Log View the system event log.
Clear System Event Log Clear the system event log.
Table 25. Items under the Startup menu
Item Option Description
Primary Boot Sequence This sequence is used when the
system starts normally. Press the
Up and Down arrow keys to select a
device.
Error Boot Sequence This sequence is used when the
BIOS determines that an error has
occurred. Press the Up and Down
arrow keys to select a device.
Automatic Boot Sequence This sequence is used when a
communication device wakes the
system up. Press the Up and Down
arrow keys to select a device.
Boot Mode [Auto] / UEFI / Legacy Choose boot policy:
• Auto: The system will prioritize
boot options in bootable devices
by running UEFI boot options first
and then processing Legacy boot
options.
• UEFI: The system will boot from
UEFI bootable devices only.
• Legacy: The system will boot from
Legacy bootable devices only.
Quick Boot [Enabled] / Disabled Select Enabled to obtain the fastest
boot time. Select Disabled to test
for a stuck key during the POST and
you may hear a beep after POST
completes.
Boot Up Num-Lock Status [On] / Off This field indicates the state of the
NumLock feature of the keyboard
after startup.
• If NumLock is On, the keys on the
keyboard will act as numeric keys.
• If NumLock is Off, the keys on the
keyboard will act as cursor keys.
Chapter 6 . Configuring the server 71