Lexmark S800 - Manual (Page 12)

Use the To
13 USB port Connect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB
port except when plugging in or removing a USB cable
or installation cable.
Use the To
1 Power supply with port Connect the printer to or disconnect the printer from a power source.
Note: The power supply input is 100-240 V AC at 0.7 A (50/60 Hz). The power supply
output is 30 V DC at 1.07 A.
2 Power supply cover Protect the power supply.
About your printer
12