Liebert Cooling Modules XDH - Manual (Page 28)

Electrical
24
6.2 Connecting Low Voltage Wiring—Optional
Low voltage connections to the Liebert XDH are available only on units with the optional condensate
detection feature. The low voltage connections are on the left side of the cabinet, in the rear, near the
power connections (see Figure 24). These dry contacts can to be connected to a monitoring unit, such
as Liebert’s SiteScan ® . For location of the entry points for the condensate detection wiring, see
Figure 25
For units equipped with condensate detection, make low voltage connections according to site-specific
drawings.
The Liebert Liqui-tect
™ condensate detection unit is available only as a factory-installed option.
Figure 25 Condensate wiring entry points
Condensate
Detection
Wiring Ports
Top of
Liebert XDH
Rear of Liebert XDH
Detail
Area