LG GDK-20W User Manual

Page 62

Advertising
background image

GDK-20W DIGITAL WIRELESS KEY TELEPHONE SYSTEM

64

D. User Desubscription


Description

This procedure makes a wireless terminal loose access right to the GDK-20W system. To de-subscribe
the wireless terminal, it should be in an idle state.

Operation

1) Attendant

station

[Trans/Pgm] + ## + Flex. Button 2 +

Station Number

+ [Hold/Save]

If you press the [Trans/Pgm] button, [Trans/Pgm] LED will flash(60 IPM Flash) and [On/Off]

LED will be turned on.. Then you can enter then user program mode.

Dial ‘##’’

Press Flexible Button 2

Enter the station number.

Press [Hold/Save] button and confirmation tone is heard.

Success or failure of the subscription is notified with confirmation tone to the attendant and the

wireless terminal.

If succeeded in de-subscription, the below LCD message will be displayed. Power-off the

wireless terminal

E S

B S C R

D

I

U

B

R E

S

P W

P

R

S

In case of the GDC-340H, If succeeded in de-subscription, GDC-340H tries to synchronize

to next registered system. If there isn’t next registered system, GDC-340H displays
“UNREGISTERED” on LCD.



Condition

1) Only attendant can de-subscribe wireless terminal
2) Attendant can de-subscribe wireless terminals those were subscribed already.(If attendant try to de-

subscribe un-subscribed wireless terminal, it will be heard error tone.

3) Attendant can de-subscribe another wireless terminal after one de-subscribing procedure.
4) Attendant can do de-subscribing procedure only when wireless terminal is at the idle state.

* Notes

: If you want to do de-subscribe procedure at wireless terminal and attendant station independently,

Follow the procedure that described below.

1) At attendant station

—

To erase all data those were subscribed.

[Trans/Pgm] + ## + Flex. Button 7 + Password(147*) + [Hold/Save]

Press the [Trans/Pgm] button, [Trans/Pgm] LED will flash(60 IPM Flash) and [On/Off] LED will be

turned on.. Then you can enter then user program mode.

Press

##

Press flexible button 7

Enter

password.

Press [Hold/Save], you will be heard confirmation tone.

—

To erase a special wireless terminal

Advertising
This manual is related to the following products: