LG GDK-20W - Manual (Page 9)

GDK-20W DIGITAL WIRELESS KEY TELEPHONE SYSTEM
11
2.2 SYSTEM CAPACITY
The following Table and Chart provide system capacities and display the system's configuration flexibility.
Table 2.2.1 System Capacities
Description Basic & Expansion Total
Time Slots 96
CO Line Ports Max. 8 (analog CO and/or
ISDN BRI)
Max direct Station connections 6(+4 via 2B modules)
Max Stations via 2B modules 4
Max Stations via ISDN So bus 4
Max DECT terminals 20
DSS/DLS Consoles per station 0
Attendant Positions 1-System
Intercom Links Non-blocking
Paging
-. All Call
-. Internal
1 zone
2 zones
Station Speed Dial 20/station, 24 digits each 20
System Speed Dial 24 digits each 79
Last Number Redial 32 digits
Music Source Inputs 2/PMU 2
External Control Contacts 1/MBU, 1/MFB 2
Alarm Input 1/MBU 1
RS-232C Ports 1/MFB 1
DTMF Receivers 2/PMU 2
CO Line Groups 4
Intercom Groups 4
Conference 3-party no limit
* Note
1. Not all maximum capacities may be achieved simultaneously.
2. DECT terminals can be registered and used up to 20 stations. But GDK-20W system supports the only four(4)
simultaneous calls basically because the MBU has one wireless terminal interface circuit.
When WTIB card is installed to SLOT5, the number of simultaneous calls is increased up to the twelve(12)(One
base station provides the four(4) simultaneous calls.).
The WTIB has the two(2) wireless terminal interface ports.
3. One RS-232C port can be installed in the position of the MFB. The purpose of RS-232C port can be
programmable in Admin station programming.
It is recommended that the RS-232C serial cable whose length is below 10 meters is used.