LG GDK-20W - Manual (Page 92)

GDK-20W DIGITAL WIRELESS KEY TELEPHONE SYSTEM
94
TABLE 6.2.2.3 ISDN PROGRAM (MAIN MENU 4)
FLEX
KEY
SUB MENU TERMINAL
MENU
RANGE DEFAULT REMARK
1 TEI Type - Auto / Fixed Auto
(4 Ports)
After you changing TEI,
press RESET button on
MBU to operate with the
new TEI type.
2 Calling Sub-
Address
- Yes / No No If this field is set to YES,
then GDK sends the calling
extension number in calling
party sub address
information of setup
message.
3 Incoming Zero
Insertion
- Yes / No No
4 Outgoing Zero
Insertion
- Yes / No Yes
5 Outgoing
Check Digit
- 0 – 9 0
6 My Area Code - - Not Assigned
7 My Nation
Code
- - Not Assigned
8 International
Code
- 4 Digits Not Assigned
9 COLP Table - Entry No
(01-10)
Not Assigned Max : 10 digits
10 MSN Table - Entry No
(01-24)
Not Assigned Flex key 1: CO line No.(1-8)
Flex key 2: Station No (2 or
3 digits)
Flex key 3: MSN No. (1-8)
Flex key 4: Night destination
( Station no(2digit/ 3digit)
Or Station Group no(61-64))
Flex key 5:Night MSN (1-8)
Flex key 6: Telephone No.
(max: 20 digits)
11 DID Digits
Conversion
1.DID Received Digit from
PX
2 - 4 3
2.DID First Two Digits
Conversion DID Received
Digit No
*** 0 - 9
# : Ignore digit
* : using received digit
3.DID Second Digit
Conversion 10 Digits 1234567890
12 Transfer Code - 2 Digits * #
1. Hold/
Retrieve 1.Service
Type
2. 3-party Conf.
Keypad/
Functional
Keypad
2.Hold Code 10 digits Not Assigned
3.Retrieve Code 10 digits Not Assigned
13 Supplemen-
tary Service
4.3-Party Conf. Code 10 digits Not Assigned
14 Loop Back - Yes/No No