Lathem 7500E - Manual (Page 20)

22
17 16
You have completed this setting. Go to the next setting listing in
"Default Settings" on page 7 to continue with the setup.
2
In the case of Semi-Monthly period,
push the CHANGE button to set the
left-side number at "4" and then
push the SET button. At that
moment, the flashing of the display
will change to the middle number.
Example: Semi-Monthly period in Payroll Mode ----- the starting dates are 1st and 16th.
Set the "Mode".
3
To set pay period, you have to input
a starting date. In this case, the 1st
starting date is 1st. Push the
CHANGE button to set at "1" and
then push the SET button. At that
moment, the flashing of the display
will change to the right-side number.
Set the "1st starting date".
4
In this case, the 2nd starting date is
16th. Push the CHANGE button to
set at "16" and then push the SET
button.
Set the "2nd starting date".
5
Push the SET button once again.
SET FUNCTION CHANGE
SET FUNCTION CHANGE
MODE
MODE
MODE
Semi-Monthly
period
SET FUNCTION CHANGE
2nd starting
date
1st starting
date
Setting Semi-Monthly Period in Payroll Mode
1
SET FUNCTION CHANGE
MODE
Push the FUNCTION button for 5
seconds and make sure the " " is
positioned under the "MODE" mark.