Quick setup, Installing ribbon cassette 1 – Lathem 7500E User Manual

Page 6

Advertising
background image

2. QUICK SETUP

13

3

This setup should take approximately ten to fifteen minutes to completeif you use the default
settings. For this setup, take the clock to a comfortable position that has access to power.

Installing Ribbon Cassette

1

Hold the left and right sides of the cover
and lift up. Then, lift up the antenna
case.

2

Turn the knob of the new ribbon cassette
in the same direction as the arrow to
tighten the ribbon.

3

Place the ribbon cassette inside the
time recorder as shown in the figure.
Push the ribbon cassette until it snaps
into the clasps on both sides. If it is
difficult to insert the ribbon cassette,
try it while turning the knob.

Knob

Clasp

Clasp
(located on both sides)

Knob

MAKE SURE THE POWER IS ON BEFORE INSTALLING.

Antenna Case

Advertising