Life Fitness 8205 - Manual (Page 12)

12
FIGURE 11
STEP 11:
• Carefully slide the HEAD PLATE ASSEMBLY (17) down
over the GUIDE RODS (10) onto the weight stack as
shown in FIGURE 11.
• Run CABLE (18) under and around the 4-1/2” PULLEY
(13) and SECURELY assemble the 4-1/2” PULLEY (13)
to the CENTER PULLEY BRACKET (3) using one 3/8 X
2” BOLT (33) and one 3/8” LOCK NUT (28). See
FIGURE 11.
33 3/8 X 2”
1 3
1 7 1 0
28
3
1 8