Life Fitness 8205 - Manual (Page 2)

IMPORTANT NOTES
Please note:
Tools Required for Assembly
* Thank you for purchasing the LIFE FITNESS 8205 CABLE CROSS OVER. Please read these instructions thoroughly and
keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water. Touch-up paint can be
purchased from your LIFE FITNESS customer service representative at (800) 328-9714.
There is a risk assumed by individuals who use this type of equipment. To minimize risk, please follow these rules:
2. Do not allow minors or children to play on or around this equipment.
1. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately. Failure to do so may
result in serious injury.
3. Exercise with care to avoid injury.
4. If unsure of proper use of equipment, call your local LIFE FITNESS STRENGTH distributor or call the LIFE FITNESS
STRENGTH customer service department at (800) 328-9714.
* Rubber mallet or hammer
* 3/4” wrench
* 9/16” wrench
* Ratchet with 3/4” and 9/16” sockets
* 5/16” Allen wrench,
* Adjustable wrench
* Tape measure
5. Consult your physician before beginning any exercise program.
2