Life Fitness 8205 - Manual (Page 14)

14
FIGURE 13
• Loop the threaded end of the CABLE (18) around a 4-1/
2” PULLEY (13) and SECURELY assemble the 4-1/2”
PULLEY (13) to the UPPER PULLEY HOUSING (8)
using one 3/8 X 2-3/4” BOLT (34), two 3/8” FLANGE
SPACERS (20), and two 3/8” LOCK NUTS (28). See
FIGURE 13.
STEP 13:
8
1 8
1 3
• Slide the 13/16” SHAFT COLLARS (42) to the top of
the GUIDE RODS (10) and SECURELY tighten the set
screws of the SHAFT COLLARS (42). See FIGURE 13.
34 3/8 X 2-3/4”
2 0
2 8
4 2