Life Fitness 8205 - Manual (Page 15)

15
FIGURE 15
STEP 14:
• Route the threaded end of the CABLE (18) through the
LOWER PULLEY HOUSING (6) as shown in FIGURE 14.
• Slip one 4-1/2” PULLEY (13) over the CABLE (18) and
SECURELY assemble the 4-1/2” PULLEY (13) to the
LOWER PULLEY HOUSING (6) using one 3/8 X 2-3/4”
BOLT (34), two 3/8” FLANGE SPACER (20) and one 3/8”
LOCK NUT (28) as shown in FIGURE 14. (Make sure the
CABLE is in the groove of the PULLEY.)
STEP 15:
• Slip one 4-1/2” PULLEY (13) over the CABLE (18) and
SECURELY assemble the 4-1/2” PULLEY (13) to the
LOWER PULLEY HOUSING (6) using one 3/8 X 2-3/4”
BOLT (34), two 3/8” FLANGE BEARINGS (20) and one
3/8” LOCK NUT (28) as shown in FIGURE 15. (Make
sure the CABLE is in the groove of the PULLEY.)
FIGURE 14
2 8
34 3/8 X 2-3/4”
1 3
2 0
1 8
6
34 3/8 X 2-3/4”
6
1 3
2 0
2 8
1 8
0 1 2 3 4 5 6
1/2 1/2 1/2 1/2 1/2 1/2