Programming the remote control, Entering a code, Reference – LG BH200 User Manual

Page 31

Advertising
background image

31

Reference

Reference

Controlling a TV with the
Supplied Universal Remote
Control

You can control the volume, input source, and power
state of your TV with the supplied Universal Remote
Control.
If your TV is listed in the table on page 32, set the
appropriate manufacturer code. Follow steps 1-2 as
shown right.
You can control your TV using the buttons below.

By pressing

You can

TV POWER

Turn the TV on or off.

INPUT

Switch the TV’s input source
between the TV and other input
sources.

CH +/–

Scan up or down through
memorized channels.

VOL +/–

Adjust the volume of the TV.

MUTE

Temporarily turns TV sound
OFF, press again to restore.

Note:
Depending on the unit being connected, you may
not be able to control your TV using some of the
buttons.

To program the remote to control
the TV using the manufacturer code

If your TV is listed in the table on the next page, set
the appropriate manufacturer code.

1. While holding down TV POWER button, press

the number buttons to select the manufacturer
code for your TV (Refer to table on the next
page).
• If more than one code number is listed, try

entering them one at a time until you find the
one that works with your TV.

2. Release TV POWER button.

Notes:

Depending on your TV, some or all buttons may
not function on the TV, even after entering the
correct manufacturer code.

If you enter a new code number, the code num-
ber previously entered will be erased.

When you replace the batteries of the remote,
the code number you have set may be reset to
the default setting. Set the appropriate code
number again.

TV Control
Buttons

TV POWER

Button

Number
Buttons

Advertising