LG BH200 - Manual (Page 36)

36
The unit’s Audio Output Specifications
HDMI OUT
PCM PCM DTS
Source Format Stereo Multi-Ch * 3 Re-encode * 6 HDMI 1.2 HDMI 1.3
Dolby Digital PCM 2ch PCM 5.1ch DTS Dolby Digital Dolby Digital
Dolby Digital Plus PCM 2ch PCM 5.1ch DTS Dolby Digital Dolby Digital
Dolby TrueHD PCM 2ch PCM 2ch DTS PCM 2ch PCM 2ch
DTS PCM 2ch PCM 5.1ch DTS DTS DTS
DTS-HD PCM 2ch PCM 5.1ch DTS DTS DTS
Linear PCM 2ch PCM 2ch PCM 2ch DTS PCM 2ch PCM 2ch
Linear PCM 5.1ch PCM 2ch PCM 5.1ch DTS PCM 5.1ch PCM 5.1ch
Linear PCM 7.1ch PCM 2ch PCM 7.1ch DTS PCM 7.1ch * 4 PCM 7.1ch
SPDIF (DIGITAL AUDIO OUT) * 5
PCM DTS Primary
Source Format Stereo Re-encode * 3 * 6 Pass-Thru * 1
Dolby Digital PCM 2ch PCM 2ch DTS Dolby Digital
Dolby Digital Plus PCM 2ch PCM 2ch DTS Dolby Digital
Dolby TrueHD PCM 2ch PCM 2ch DTS PCM 2ch
DTS PCM 2ch PCM 2ch DTS DTS
DTS-HD PCM 2ch PCM 2ch DTS DTS
Linear PCM 2ch PCM 2ch PCM 2ch DTS PCM 2ch
Linear PCM 5.1ch PCM 2ch PCM 2ch DTS PCM 2ch
Linear PCM 7.1ch PCM 2ch PCM 2ch DTS PCM 2ch
Analog
Output
Stereo
Primary Pass-Thru * 1, * 2
Notes:
*1 The secondary and interactive audios may not be included in the output bitstream if [SPDIF] or [HDMI]
option is set to [Primary Pass-Thru].
*2 This player automatically selects the HDMI audio according to the decoding capability of the connected
HDMI device if [HDMI] option is set to [Primary Pass-Thru].
*3 The [PCM Multi-CH]/[Primary Pass-Thru] setting of the [HDMI] option and [DTS re-encode] setting of the
[SPDIF] option cannot be set together. If you set the [HDMI] option to [PCM Multi-CH] or
[Primary Pass-Thru], the [SPDIF] option is set to [PCM Stereo] automatically. Also, if you set the [SPDIF]
option to [DTS Re-encode] and the [HDMI] option is set to [PCM Stereo] automatically.
(The Linear PCM audio source may output as PCM stereo audio from DIGITAL AUDIO OUT jack if the
[HDMI] option is set to [Primary Pass-Thru] or the [SPDIF] option is set to [DTS Re-encode].)
*4 The Linear PCM 5.1ch/7.1ch audio source recorded at 192 kHz sampling frequency will output as PCM
stereo audio.
*5 The sampling frequency of SPDIF (DIGITAL AUDIO OUT) is limited to 96 kHz.
*6 The audio is limited to 48 kHz and 5.1 ch if [HDMI] or [SPDIF] option is set to [DTS re-encode].
The DTS audio will output on BD and HD DVD advanced disc, and the original audio will output on the
other discs.
• The audio is always output as PCM 48kHz/16 bit during Audio CD or MP3/WMA file is playing back.
• The MPEG audio source is always output as PCM 2ch.
Jack/
Setting
Jack/
Setting