Life Fitness 95Ti - Manual (Page 40)

39
U
SING
Q
UICK
S
TART
D
ISABLE
This configuration has two possible values which are selected using the incline arrow keys.
The values are as follows:
• Quick Start with numeric keys “allowed”
• Quick Start with numeric keys “not allowed”
The default value is “allowed”. This means that a user can start a QUICK START workout by
simply entering a desired workout speed using the numeric keys only. If the configuration is set
to “not allowed”, a user cannot use the numeric keys to start a QUICK START workout. This
configuration is designed to prevent users from inadvertantly starting a QUICK START workout
on treadmills that are integrated into a fitness networking system that requires the user to enter
a USER ID and press ENTER before beginning a workout. A QUICK START workout can
always be started by pressing the QUICK START key.
U
SING
T
HE
S
TART
M
ESSAGE
S
ETUP
This configuration allows for a custom start-up message to be displayed before the default
“Select Workout or Press Quick Start” message. The custom message can contain up to 52
characters.
C
REATING
/C
HANGING A
S
TART
M
ESSAGE
After entering the Manager’s Configuration, scroll to the START MESSAGE SETUP option and
press ENTER. Use the SPEED ARROW keys to select an available letter, number or special
character. Use the INCLINE ARROW keys to move forward or backward throughout the mes-
sage, or insert spaces, one character at a time. The current character will blink until the position
is moved with the INCLINE ARROW keys.
S
AVING A
S
TART
M
ESSAGE
To save the START MESSAGE, press ENTER. “MESSAGE SAVED” will appear in the message
center confirming the message has been saved. To exit the start message setup without saving,
press the clear key twice. “MESSAGE NOT SAVED” will appear in the message center confirm-
ing the message has not been saved.
E
RASING A
S
TART
M
ESSAGE
After entering the Manager’s Configuration, scroll to the START MESSAGE SETUP option and
press ENTER. Press enter to enter the current START MESSAGE. Press the COOL DOWN key
to erase the current START MESSAGE. “MESSAGE ERASED” will appear in the message cen-
ter stating the message has been erased.