Life Fitness 95Ti - Manual (Page 45)

44
6.3 T
ROUBLESHOOTING THE
T
READMILL
* See Section 6.6 “How to Obtain Product Service” for contact information.
Malfunction
No Power
Probable Cause
On/Off switch.
Insufficient power source.
Damaged line cord.
Line cord improperly seat-
ed in socket.
Tripped circuit breaker.
Corrective Action
Turn the switch to the ON
position.
Plug treadmill into a dedi-
cated 20 amp circuit. Refer
to the Operations Manual.
Using a voltmeter, verify
power at outlet. If no power
exists, reset circuit breaker
at panel.
Replace line cord. Contact
Life Fitness Customer
Support Services*.
Inspect power connection
at wall outlet and at
machine for proper contact.
Verify that circuit breaker is
not open. If open, reset cir-
cuit breaker.
The location of the circuit
breaker is on the outside of
the treadmill, next to the
ON/OFF switch. The
breaker is a circular disk
with a white button. The
white button will have
popped out. Press the
white button at it’s center
to reset the circuit breaker.