Lowrance electronic iWAY 600C - Manual (Page 47)

41
Reset Options
To reset all settings to the factory defaults, select
R ESET
O PTIONS
. A dialog box will appear asking if you want to "Reset
all the options?" To reset all options select
Y ES
. Once you
reset the options another dialog box will appear asking, "Do you want
to clear your address book?" Select
YES
or
NO
depending on whether you
want to clear all your Address Book contacts.
Reset Options confirmation dialogs.
Device Information
From time to time, Lowrance updates the operating system
software in some of its products. These software upgrades are
usually offered to customers as free downloads from our web
site, www.lowrance.com.
Complete information and instructions for installing an update will be
available on the update's page at the Lowrance web site. These up-
grades make the unit perform better or introduce a new feature or
function. You can find out what software version is running in your
unit by using the Device Information command.
Navigation Mode
The iWAY's primary function is to provide turn-by-turn
navigation instructions, but it also can display plot trails and
perform traditional straight-line or point-to-point navigation
in off road situations.
Point-to-point mode uses straight-line navigation, the original method
used by the Global Positioning System. This function is handy when
you want to find a map feature, waypoint or point of interest on a lake,
in coastal waters or in off-road areas where turn-by-turn won't work.
Point-to-point mode does not include audible voice directions. For more
information concerning Point-to-Point mode, refer to Section 6: Point-
to-Point Navigation.