Lowrance electronic Lowrance iFINDER Hunt - Manual (Page 111)

103
To set Repeat Function: Press
↓
R
EPEAT
and press ENT to check it
(turn on) and uncheck it (turn off). After the option is set, press EXIT
repeatedly to return to the main page display.
To set Shuffle Function: Press
↓
S HUFFLE
and press ENT to check it
(turn on) and uncheck it (turn off). After the option is set, press EXIT
repeatedly to return to the main page display.
Track Smoothing
This is a factory setting that should always be left on. When stopped or
traveling at slow speeds (such as walking or trolling), Track Smoothing
prevents trails from wandering. It has the same steadying effect on the
steering arrow, the compass rose and the map in track-up mode.
Track Smoothing option, turned on.
Trail Options
There are several options you can use with trails. Some affect all trails,
other may be applied to a particular trail. You can change the way
trails are updated, display or hide trails, create a new trail or delete a
trail. These options are only available in Advanced Mode, but changes
made in Advanced will affect the appearance of trails in Easy Mode.
General Trail Options
To access the Trails Menu:
1. Press MENU | MENU |
↓ to
M Y T RAILS
| ENT | ENT .